Indexing Continuous Extrusion Blow Molding Machinery

Our line of indexing continuous extrusion blow molding machinery combines the advantages of both wheel blow molders and shuttle blow molding machinery, namely high output rates with the advantage of a calibrated water cooled neck finish.

Rotary Blower Data Sheet (PDF)

rotary blow molding machine
parison control

Designed to accommodate multiple parisons, multilayer coextrusion, and in-mold-labeling of containers from 12 oz. to 2.5 gallons, the blow molding machinery offers outstanding quality at excellent output to capital cost ratios. The blow molder has been designed for ultimate flexibility by incorporating standard quick changeover features.

Blow Molding Clamp Specifications

Model

R4-11

R8-11

R8-15

Mold Width 508 mm 508 mm 762 mm
Mold Length 457 mm 457 mm 457 mm
Mold Depth 2 x 127 mm 2 x 127 mm 2 x 127 mm
Daylight 222 mm 222 mm 222 mm
Mold Stroke 222 mm 222 mm 222 mm
Clamping Stations 4 8 8
Clamp Tonnage 11 11 15

Diehead Configurations

No. of Cavities

R4-11

R8-11

R8-15

4 1
8 2/250 mm 1 1
12 3/170 mm
16 4/125 mm 2/250 mm 2/380 mm
20 5/100 mm
24 6/85 mm 3/170 mm 3/250 mm
32 4/125 mm 4/190 mm
40 5/100 mm 5/150 mm
48 6/85 mm 6/125 mm
56 7/100 mm
64 8/95 mm
72 9/85 mm

Maximum Outputs

Model

R4-11

R8-11

R8-15

Minimum Cycle 12 Seconds 16 Seconds 16 Seconds
1 Head 1200/hr 1800/hr 1800/hr
2 Heads 2400/hr 3600/hr 3600/hr
3 Heads 3600/hr 5400/hr 5400/hr
4 Heads 4800/hr 7200/hr 7200/hr
5 Heads 6000/hr 9000/hr 9000/hr
6 Heads 7200/hr 10,800/hr 10,800/hr
7 Heads 12,600/hr
8 Heads 14,400/hr
9 Heads 16,200/hr

Utility Requirements

Model

R4-11

R8-11

R8-15

Water 115GPM, 40°F, 96PSI 275GPM, 40°F, 96PSI 300GPM, 40°F, 96PSI
Air 100cu. ft/min@100PSI 150cu. ft/min@100PSI 200cu. ft/min@100PSI
Electrical 460V, 245KW 460V, 245KW 460V, 245KW
Hydraulics 30HP, 21GPM, 100 gallon tank 50HP, 41GPM, 150 gallon tank 75HP, 60GPM, 150 gallon tank