Sister Company Monroe Mold Expands Its Plant to Continue Growth
Monroe Mold, manufacturer of molds and tooling for the blow-mold sector of the plastics industry, is expanding its facility to gain increased manufacturing capacity...
| "The R&B blow-molding machines and blow molds from Monroe Mold provide a combined product line distinct from any other OEM in the industry," said Al Hodge, president of R&B Holdings Co. LLC. |
Free Machinery Audit!
February 5, 2008
At your request, R & B will send one of our highly experienced and qualified Service Technicians to your plant to review the condition of your blow molding and downstream equipment. This is an excellent way for you to benefit from our decades of experience designing, building, and rebuilding all types of machines including wheels, IBM's, shuttle's, accumulator head, recip's, and trimmers from any OEM.
At the conclusion of the audit, you will receive a detailed report on the condition of your equipment as well as a quote for any repairs recommended to return the equipment to optimum running condition. In addition, you will also receive recommendations for potential upgrades to improve the efficiency of your equipment and corresponding quotes.
The charge for this audit is simply the actual cost of the Service Technicians time and travel and is completely waived if you contract with R & B to complete the quoted work!
Let R & B put our extensive experience to work for you!
Archive
- Moldmaker’s Plant Expansion Increases Ability to Repair Worn, Damaged Molds
- Hunters get holiday to hunt
- Slideshow: Things Your Extruder Screw Designer Never Told You About Screws
- Basic Screw Geometry: Things Your Extruder Screw Designer Never Told You About Screws
- R&B in the News: PlasticsNews.com
- Screw Recommendations for Specific Resins and Processes
- New Reciprocating Screw Introduced by R&B Plastics Machinery
- Sales Engineer Hired at Monroe Mold
- Monroe Mold Expands Its Plant to Continue Growth
- R&B Plastics Machinery Hosts Local Congressman
- Manufacturing Roundtable to be held at R&B Plastics Machinery: Congressman Tim Walberg to speak at July 18 morning event
- Equipment Manufacturer Expands Engineering Staff with Matt Gifford
- R&B reminds all that the Section 179 of the Federal Tax Relief Act of 2010 has been extended and the deductable amount increase for 2011
- Plastics Blow-Molding OEM, R&B Plastics Machinery, Uses Rockwell Automation Integrated Architecture to Achieve Parison Control System
- Employees Recognized for Dedication, Long-Tenure and Commitment
- R&B Machinery to Exhibit at the Society of Plastic Engineers ANTEC 2011 Conference
- Two Staffers Promoted at R&B Plastics Machinery
- Chief Technical Process Consultant: Tim Womer
- Company Wins First Prize in Holiday Parade
- R&B Plastics Machinery Announces 2010 Holiday Schedule
- R&B Plastics Machinery's Ability to Adapt to the Ever-Changing Plastics Industry Featured on AnnArbor.com
- Al Hodge to lead privately owned company
- Equipment Manufacturer Expands Sales Staff with Two New Positions
- Max Extruder, a New Single-Screw Extruder Line from R&B, Featured in Plastic News
- Case Study: Parison Programming Control
- Industry Recognizes R & B's Superior Controls Technology
- Free Machinery Audit!
- New Low Cost Trimmer Released: Finally, a low cost highly efficient Trimming solution!
- New Industrial Shuttle Machine: R & B introduces their newest continuous extrusion shuttle machine, the RBDS-60!
- Machine Rebuilding: Increase the productivity of your existing equipment by 30%! Sounds crazy?
- R&B Plastics Integrates Motion Control Functionality into an Off-the-Shelf PLC to Optimize Blow Molding