Sister Company Monroe Mold Expands Its Plant to Continue Growth
Monroe Mold, manufacturer of molds and tooling for the blow-mold sector of the plastics industry, is expanding its facility to gain increased manufacturing capacity...
| "The R&B blow-molding machines and blow molds from Monroe Mold provide a combined product line distinct from any other OEM in the industry," said Al Hodge, president of R&B Holdings Co. LLC. |
R&B Machinery to Exhibit at the Society of Plastic Engineers ANTEC 2011 Conference
January 11, 2011
R&B Plastics Machinery will exhibit at ANTEC, the Society of Plastics Engineers’ (SPE) annual technical conference. ANTEC 2011 will be held at the Hynes Convention Center in Boston, MA. R&B’s booth will display the company’s single-screw extruder product line, blow mold machinery, screw designs and service/support capabilities in the exhibition hall at the Hynes Convention Center on May 2-4, 2011. For further information visit www.4spe.org/conferences/antec-2011
Archive
- Womer leaps from small-town boy to industry leader
- PlasticsNews.com: R&B reaching out to dairy customers
- R&B Expands Reciprocating-Machine Service for Bottling Facilities
- Frank Kennedy Joins R&B Plastics Machinery as Product Sales Manager
- Moldmaker’s Plant Expansion Increases Ability to Repair Worn, Damaged Molds
- Hunters get holiday to hunt
- Slideshow: Things Your Extruder Screw Designer Never Told You About Screws
- Basic Screw Geometry: Things Your Extruder Screw Designer Never Told You About Screws
- R&B in the News: PlasticsNews.com
- Screw Recommendations for Specific Resins and Processes
- New Reciprocating Screw Introduced by R&B Plastics Machinery
- Sales Engineer Hired at Monroe Mold
- Monroe Mold Expands Its Plant to Continue Growth
- R&B Plastics Machinery Hosts Local Congressman
- Manufacturing Roundtable to be held at R&B Plastics Machinery: Congressman Tim Walberg to speak at July 18 morning event
- Equipment Manufacturer Expands Engineering Staff with Matt Gifford
- R&B reminds all that the Section 179 of the Federal Tax Relief Act of 2010 has been extended and the deductable amount increase for 2011
- Plastics Blow-Molding OEM, R&B Plastics Machinery, Uses Rockwell Automation Integrated Architecture to Achieve Parison Control System
- Employees Recognized for Dedication, Long-Tenure and Commitment
- R&B Machinery to Exhibit at the Society of Plastic Engineers ANTEC 2011 Conference
- Two Staffers Promoted at R&B Plastics Machinery
- Chief Technical Process Consultant: Tim Womer
- Company Wins First Prize in Holiday Parade
- R&B Plastics Machinery Announces 2010 Holiday Schedule
- R&B Plastics Machinery's Ability to Adapt to the Ever-Changing Plastics Industry Featured on AnnArbor.com
- Al Hodge to lead privately owned company
- Equipment Manufacturer Expands Sales Staff with Two New Positions
- Max Extruder, a New Single-Screw Extruder Line from R&B, Featured in Plastic News
- Case Study: Parison Programming Control
- Industry Recognizes R & B's Superior Controls Technology
- Free Machinery Audit!
- New Low Cost Trimmer Released: Finally, a low cost highly efficient Trimming solution!
- New Industrial Shuttle Machine: R & B introduces their newest continuous extrusion shuttle machine, the RBDS-60!
- Machine Rebuilding: Increase the productivity of your existing equipment by 30%! Sounds crazy?
- R&B Plastics Integrates Motion Control Functionality into an Off-the-Shelf PLC to Optimize Blow Molding